Before using Aimetis Remote for the Aimetis A10D Thin Client™, ensure the following pre-requisites are met:
At least 1 Aimetis Thin Client device is powered on, properly configured for your network, and set up with at least 1 camera. See the Aimetis Thin Client Online Help for more information.
Aimetis Symphony™ Mobile Bridge is installed, licensed, and configured correctly. See the Symphony Mobile Bridge Installation Guide for more information.
The first time Remote App is launched, you are prompted to create a connection to a Thin Client device using its IP Address and user credentials. Your network administrator may need to provide these details.
Tap the Plus (+) icon.
To detect available Thin Client devices on your network automatically, tap Detected Thin Clients and select a device from the list.
Otherwise, specify the Thin Client IP Address and Port.
Specify the User Name and Password configured on the device.
Specify whether this connection is the default connection. When you enable the Default Connection option, Remote App automatically connects to this Thin Client on startup. Only one connection can be set as the default connection. If you add a new connection and specify it as the default connection, all other connections will have this option automatically disabled.
The new connection is automatically saved .
Tap Connect.
Once Remote App is connected to a Thin Client device, the last selected camera view loads. If no camera views are defined, create a new camera view.
You can also:
Tap Connections. In portrait orientation, double-tap Connections.
Tap a different device connection.
Tap Connect to load thelast selected camera view.
Tap Connections. In portrait orientation, double-tap Connections.
Tap the connection you want to modify.
Tap Disconnect.
Modify the connection details as needed. Any changes are automatically saved.
Tap Connect to reconnect to the device.
Tap Connections. In portrait orientation, double-tap Connections.
Tap Edit.
Tap the Minus (-) icon to the left of the connection name.
Tap Delete.
Tap Done.
Tap Connections. In portrait orientation, double-tap Connections.
Tap the connection you want to disable.
Tap Disconnect.
Camera views are collections of camera layouts. You can define layouts containing various numbers of cameras.
Tap Remote.
Tap the top-left down arrow to access the camera view list.
Tap to select a camera view option.
Tap each thumbnail to specify the camera for that view.
Tap More [...] > Save As.
Enter a custom view name.
Tap Save.
Tap Remote.
Tap the top left down arrow to access the camera view list
Tap to select a different camera view.
Tap Remote.
Tap More [...] > Save As.
Modify the view name.
Tap Save.
Tip: To delete cameras that are setup using a direct connection ensure the selected camera is deselected from the Settings page. See Aimetis Thin Client Online Help for more information.
Tap Remote.
Tap More [...] > Delete.
Tap the – icon beside the camera view you want to delete.
Tap Delete.
Tap Remote.
Double-tap a camera thumbnail to view a full-screen image.
Double-tap the full-screen image again to return to the camera view.
On any camera view, tap a camera thumbnail to select a different camera.
The cameras available depend on the devices configured in Aimetis Symphony. See Aimetis Symphony Online Help for more information.
Important: Changes made to device settings can impact device operation. Use caution when modifying device settings. Your network administrator may need to provide some of these details.
Tap Settings.
The Thin Client web interface Settings page opens. See Aimetis Thin Client Online Help for more information on device settings.
Copyright© 2015 Aimetis Corp. All rights reserved.
Document Revision Date: 01/07/2015