1. Connect a USB joystick to the client PC running Symphony Client.
2. Click the Settings icon and select Joystick.
1. If the joystick sensitivity is not high enough, edit %appdata%\Aimetis\acc.ini and change the following parameters with the default values:
[joystick]
maxpan=100
maxtilt=100
maxzoom=100
pollinterval=50
deadzone=20
If response is too sensitive, try lowering the max values to 80 or 50.
If the PTZ control appears jerky/erratic, decrease the pollinterval.
If the joystick moves while idle, increase the deadzone (between 1 and 100).
2. Save the acc.ini and then restart Symphony Client for the changes to take effect.